EFeCr-AlA

2023-05-17 15:50:55 来源：钢铁之家阅读量：0

牌号	EFeCr-AlA
	W74011
对应标准	AWS A5.13/A5.13M-2010 堆焊焊条规范保护金属电弧焊 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
归类	合金钢
标签	铁基堆焊焊条
说明	Characteristics. Weld metal deposited by these electrodes will contain massive chromium carbides in an austenitic matrix providing excellent wear resistance and toughness. Surface checks are typical and give some degree of stress relief. Deposits cannot be machined and must be ground when finishing is required. To ensure the desired deposit composition, two layers are recommended. Additional layers invite spalling and must be applied with caution. Electrodes are suitable for welding on carbon, alloy, and austenitic steels as well as cast irons. The weld metal deposited by EFeCr-A1A electrodes generally provides greater resistance to impact but slightly less abrasion resistance than weld metal deposited by EFeCr-A4 electrodes. Applications. Deposits frequently are used to surface parts and equipment involved in sliding and crushing of rock, ore, etc., such as bucket lips and teeth, impact hammers, and conveyors. Very low coefficients of friction develop as a result of scouring by earth products.

EFeCr-AlA 化学元素成分含量(%)

成分	C	Si	Mn	P	S	Cr	Mo	其他合计	更多
最小值	3.5	0.5	4	-	-	20	-	-	Fe:余量
最大值	4.5	2	6	0.035	0.035	25	0.5	1	Fe:余量

其他单个或其他合计化学成分包括表中未指定值的化学成分。只有在假定存在或在常规分析中，且有迹象表明其成分将超过规定值的情况下，才应进行分析。

碳当量计算

注：本资料来源于互联网的公开资源整理，我们不保证这些资料的准确性、完整性和适用性。这些资料仅供您参考，不应用于任何商业用途或决策依据。本资料所记载的技术信息是说明产品的代表性特点和性能的参考值，对于因误用或不当使用本资料所记载的信息等而造成的损害恕难承担责任，敬请周知。

上一篇：A213 T22
下一篇：S390GD+Z