P245GH

2023-05-17 18:06:38 来源：钢铁之家阅读量：0

牌号	P245GH
欧标钢号	1.0352
对应标准	EN 10222-2-2017 压力用途用钢制锻件第2部分具有高温特性的铁素体和马氏体钢 Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
归类	碳钢

P245GH 化学元素成分含量(%)

成分	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb	更多
最小值	0.08	-	0.5	-	-	-	-	-	-	-	-	-	Cr+Cu+Mo+Ni≤0.70；碳当量≤0.41
最大值	0.2	0.4	1.3	0.025	0.015	0.3	0.3	0.3	0.08	0.03	0.02	0.01	Cr+Cu+Mo+Ni≤0.70；碳当量≤0.41

碳当量计算

P245GH 机械性能

厚度 t mm	抗拉强度 σ_b Mpa	屈服点 σ_s Mpa	断后伸长率或延伸率 δ %	冲击吸收能量 KV2 J
t≤35	410~530	≥245	I：≥25，tr/t：≥23	I：≥40，tr/t：≥27
35＜t≤160	410~530	≥220	I：≥25，tr/t：≥23	I：≥40，tr/t：≥27

① I = longitudinal to main forging directions；tr = transverse to main forging directions；t = tangential.
② Maximum room temperature for the impact test is 20 °C. By option, impact testing may be carried out at 0°C, with the condition to fulfil the impact values as stated in this table.
③ Until the yield point criteria are harmonized in the various national codes, determination of ReH may be replaced by determination of Rp0.2. In this case Rp0.2 values are 10 MPa lower for ReH values up to 355 MPa and 15 MPa lower for ReH values greater than 355 MPa.

热处理制度（仅供参考）

A= annealed; N = normalized; QT= quenched and tempered; NT= normalized and tempered. a = air; f = furnaced; o = oil; w = water or water based medium.

注：本资料来源于互联网的公开资源整理，我们不保证这些资料的准确性、完整性和适用性。这些资料仅供您参考，不应用于任何商业用途或决策依据。本资料所记载的技术信息是说明产品的代表性特点和性能的参考值，对于因误用或不当使用本资料所记载的信息等而造成的损害恕难承担责任，敬请周知。

P245GH

热处理制度（仅供参考）